Home / Learn / OBC Knowledge Center
Knowledge center · Free tools · Beta
OBC Knowledge Center
Free tools, references and plain-language guides to the Ontario Building Code and the Building Code Act, for homeowners, designers and architects. Find which Part applies, check insulation packages, look up key terms, and learn when you need a permit and who can design your project.
Start here
Tools and references
Four resources that work together. Start with the matrix builder if you have a project in mind, or read the guides first.
OBC code matrix builder
Answer a few questions to see which Part of the Code applies (3, 9, 10 or 11), then fill in the code data matrix step by step and export it as a PDF or DXF. Climate data fills in from SB-1 when you choose the location.
Interactive tool · Parts 3, 9, 10 and 11 · SB-1 climate data
SB-12 envelope calculator
Compare the SB-12 compliance packages for your climate zone and heating system, then check that your ceiling, wall, floor, basement and slab insulation meets the package you choose.
New · SB-12 (2024) Tables 3.1.1.2. and 3.1.1.3. · Part 9 housing
OBC key definitions
Plain-language explanations of the terms that decide which rules apply: building area, grade, storey, major occupancy, limiting distance, fire separation and more.
About 35 terms · Div. A 1.4.1.2.
Building Code Act essentials
When you need a building permit, how long the review takes, who does what, and when you need an architect, an engineer or a BCIN designer.
Building Code Act, 1992 · Div. C
What is coming
Tools we are building next
All tools are free and in Beta. They are drafting aids built by LA Design and are checked against the Code as we go. This is our current plan; dates depend on verification.
Now: SB-1 climate data
Choose your municipality or any SB-1 location in the matrix builder and the heating degree days, design temperatures, snow and wind loads and Part 9 seismic value fill in automatically.
Live · SB-1 (2024) Tables 2 and 3
Now: SB-12 package check
Find the compliance packages for your climate zone and heating type and check the nominal or effective insulation values for each part of the house. Results can be sent to the matrix builder.
Live · Beta
Now: effective RSI assembly builder
Build a wood-frame wall, roof, floor, basement wall or slab layer by layer and calculate its effective thermal resistance with the SB-12 Appendix A method. The result goes straight into the SB-12 check. Additions to existing houses are covered too.
Live · Beta · SB-12 Appendix A, NRCan tables
Next: spatial separation look-up
Calculate the permitted area of unprotected openings from the limiting distance and exposing building face, instead of looking it up by hand.
Planned · Div. B Tables 9.10.15.4. and 3.2.3.1.
Later: plumbing fixtures and SB-10
Count the required water closets from the occupant load, and an envelope check for larger buildings that use SB-10.
Planned · Div. B 3.7.4. · SB-10
Prefer to talk it through?
The tools are a starting point. For permit drawings, zoning review or a second opinion on your code analysis, book a free 15-minute call.
Please read
Disclaimer
This page is general information written in plain language by LA Design Inc. It is not legal or professional advice and it is not the official text of the law. The tools and guides on these pages are drafting aids and summaries, not the official text. Laws and the Building Code change. Always read the current official version and confirm with your municipality’s building department, the Ontario Association of Architects, Professional Engineers Ontario, or a lawyer before you rely on it. LA Design Inc. accepts no liability for decisions made using this page. Not affiliated with or endorsed by the Province of Ontario, the OAA or PEO.
Beta page · Last checked November 2026. Spotted an error? Please tell us through our contact page.
